Although there are only a few specifications of FRP grating, the choice is relatively simple, as long as you pay attention to the following points:
1. First of all, it is necessary to determine what the FRP grating is used for, that is, to clarify the purpose of its use. For example, the manufacturer of the car wash is to buy the grille board to prepare to use the grille board as the carrier board for the car wash.
2. After determining the purpose of the FRP grating, it is time to determine the size and specifications of the grating plate used. Through the relevant introduction of the manufacturer, you can have a general understanding of the grille. For example, in a car wash, you can choose a 2.5cm thick grille or a 3.8cm thick grille.
3. In electroplating equipment factories, grid plates with a thickness of 2.5 cm are commonly used. In sewage treatment plants and chemical plants, 3.8 cm thick grid plates are often used.
4. After choosing a suitable thickness of FRP grating, calculate the size of the grating during use. Such as in a car wash. The size of a car wash is mostly 1.220m*2.440m, while the size of the FRP grille is 1.220*3.660, which needs to be cut before it can be put into use.
5. There is another point to choose suitable raw materials to make FRP gratings that meet the requirements. If the gratings used in chemical plants or sewage treatment plants are used, it is necessary to select resins with higher corrosion resistance for production.
