As a new type of building material, FRP grids are fabricated by a molding process with many regularly distributed rectangular and square spaces, which have the mechanical characteristics of two-way homogeneity. It can be widely used in operation channels, equipment channels, drilling channels, walkways, etc. in industries such as petroleum, chemical electronics, electric power, paper, printing and dyeing, electroplating, marine exploration, sewage treatment, etc. It is an ideal product in corrosive environments, and it is also suitable for Civil building facilities.
Colors are divided into: yellow, green, gray, blue, white, red, orange, etc. (can be customized according to color card or sample color processing), specific applications: operating channels, trench covers, aisles, stair treads, tree grate, Precautions for the installation of the car wash room floor and the trench cover, the remaining length of the trench (well) is lack of 1 meter by modulus.
According to the width of the ditch (well) and the load-bearing requirements, the type of FRP grating is selected, and it is recommended to select the standard size for design and construction. Notes: The anchoring piece of the support frame must be firmly buried in the cement layer, and the support surfaces on both sides of the ditch must be flat and Consolidate.
The direction is the load-bearing (supporting) direction. The length of the grid is fixed according to the width of the trench (well), and the layout is based on the length of the trench (well). The standard plate width that meets the processing modulus is 995mm, and the gap between the plates is 5mm.
