Similarities and differences between FRP grating and microporous FRP grating. Microporous FRP grating is a kind of FRP grating with a diameter of 19cm*19cm. This kind of microporous FRP grating is also widely used now, mainly in some bathing centers, farms, car washes and some chemical plants.
The raw materials of the microporous FRP grating and the general FRP grating are the same. They are made of resin raw materials, glass fiber filaments and fillers. The production methods are also crafted wire drawing, resin pouring and overall molding, and strong load-bearing.
The difference between the microporous FRP grating and the general FRP grating is mainly due to the different structure. The aperture of the small hole FRP grating sheet is divided into two layers, the upper layer is mainly 19cm*19cm, the base layer is mainly 38cm*38cm, while the general FRP grating only has one layer, the aperture is 38cm*38cm, so the small hole FRP grating bears more weight Stronger, the production is more messy, so the price is higher than the general FRP grille.
Differences in scale standards. The small-hole FRP grating and the general FRP grating are produced by different molds. The production process of the small-hole FRP grating is more complicated, and the daily output value is relatively low. The overall size of the small hole FRP grating is not as large as that of the general FRP grating, so there are relatively limitations in the selection, so the standard should be communicated early.
Microporous FRP grating Microporous FRP grating also has the advantages of anti-impact, no deformation, anti-corrosion and no rust. The load-bearing capacity is more than 800 kilograms per level, the service life is as long as 30-50 years, and there is no need for repair and maintenance after installation, and the cost of repeated repairs and replacements is also avoided. It is generally used in environments such as car washes and sewage treatment plants that require both through holes and filtering effects.
