FRP grating has superior performance? There are also aspects to pay attention to in application. Because the density of FRP grating is very small? Therefore, the quality of the products made is relatively light. Should it be used in places with high groundwater levels? To set up anti-floating methods to avoid the phenomenon of floating pipes on the FRP grille? Moreover, relevant measures such as rainwater guidance must be done well.
Suppose the area has been installed with FRP grids and the pipeline is in the process of repairing cracks? It must have the most dry conditions and require the use of resin or fiber cloth cured for seven or eight hours during construction. Because the UV resistance of the FRP grille is not very good? So it is necessary to attach a layer of resin to its outer surface to delay its aging moment? And it can work in a better environment.
Secondly, after the glass fiber reinforced plastic grille is placed steadily, it should be fixed with glass cylinder fixings to avoid side shifts and swaying caused by displacement. The effect of FRP grating varies greatly in different places. How can I know the FRP grating I need? First of all, it is necessary to confirm what the FRP grating is required to be used for, that is, to clarify its application goals. For example, the manufacturer of the car wash shop buys the grille board to prepare to use the grille board as the carrier board for the car wash.
Secondly, after confirming the purpose of the FRP grating, it is time to confirm the scale and standard of the grating used. Through the relevant introduction of the manufacturer, you can have a certain understanding of the grille. For example, in a car wash, you can choose a 2.5cm-thick grille or a 3.8cm-thick grille. In electroplating equipment factories, grid plates with a thickness of 2.5 cm are commonly used. In sewage treatment plants and chemical plants, 3.8 cm thick grid plates are often used.
