How to cut fiberglass grating board well?
Introduction to cutting methods:
For the installation of fiberglass grating, we first need to do a good job in cutting the grating.
1. Reasonably cut and process the grille according to its size and installation requirements, in order to achieve maximum economic benefits without affecting its internal performance. Cutting the end face requires resin coating processing to ensure its corrosion resistance is not affected.
A. Cutting:
Linear cutting: Fiberglass grating can be cut on-site using ceramic discs or emery disc cutters, or even ordinary steel saw blades.
Curve cutting: Electric saws or hacksaws with metal cutting blades can be used for grid opening, arc cutting, and other arc cutting.
B. Drilling:
Holes over 12mm can be drilled with ordinary Fried Dough Twists drill.
Small holes can be drilled using portable electric hole processing tools or general electric hand drills.
C. Grinding:
Hand held angle grinder, Bench grinder, ordinary file and sandpaper can be used for polishing.
Note: a. This material cannot be turned or tapped.
b. Arbitrary cutting will not change the mechanical properties of the grid, nor will it cause scattering or other consequences.
2. Safety measures:
Before cutting and processing, operators should wear protective glasses and masks to prevent objects from splashing into their eyes and reduce dust inhalation; Wear gloves and work clothes to prevent dust from entering the skin and causing allergies; Choose a well ventilated and brightly lit area for cutting; Before cutting, all electric tools should be checked for completeness.
Click here
